1. If a wooden stake reads ⑤, what does it mean?

Group of answer choices

1. 5 ft offset
2. No. 5 stake
3. No. 5 corner
4. 5 ft from the permanent marker

1. On a wooden stake, it writes 10' o/f. What does it mean?

Group of answer choices

1. 10 ft offset
2. 10 ft cut
3. 10 ft fill
4. station 10

1. Which of the following describes the operation of giving lineand grade.

Group of answer choices

1. Place reference marks or stakes to establish the location andelevation of a project.
2. Drawthe line and grade on paper.
3. Mark on drawings with the grade of lines.
4. Establish a line between two unkown points.

1. Which of the following statement about giving line iscorrect?

Group of answer choices

1. Giving line doesn't involve angles.
2. Only one mark is needed for each line.
3. The process of giving line consists in establishing a directionby turning a predetermined angle and placing a series of marksalong the line at predetermined distances.
4. A tape measure is adequent for the whole operation of givingline.

1. A mark is to be set at an angle of 70°00′00′′ from a given lineat a distance of 500 ft from the instrument. After setting themark, the angle is measured by repetition and determined to be69°59′30′′. How far should the mark be shifted so that the angle isset at 70°00′00′′?

Group of answer choices

a. 0.1 ft

b. 0.2 ft

c. 0.053 ft

d. 0.073 ft

1. The HI of a level is 567.89 ft. A blue top is to be set to marka grade of 558.12 ft. What is the value of grade rod?

Group of answer choices

a. 7.89 ft

b. 9.77 ft

c. 6.54 ft

d. 3.36 ft

1. It is required to set a stake to mark a grade of 45.49 ft. TheHI of the level is 53.56 ft and the rod on stake reads 4.32 ft.Determine the amount of cut (C) or fill (F) to be marked on thestake.

Group of answer choices

1. cut 8.07 ft
2. fill 8.07 ft
3. cut 3.75 ft
4. fill 3.75 ft

1. It is required to set a stake to mark a grade of 53.72 ft. TheHI of the level is 60.05 ft and the rod on stake reads 10.93 ft.Determine the amount of cut (C) or fill (F) to be marked on thestake.

Group of answer choices

1. cut 6.33 ft
2. fill 6.33 ft
3. cut 4.6 ft
4. fill 4.6 ft

1. Which of the following statement about batter board iswrong?

Group of answer choices

1. It is a standard method for temporarily referencing thebuilding corners.
2. A batter board is simply a horizontal wooden plank fastened totwo vertical posts.
3. Batter boards need to cover the whole building perimeter.
4. Batter boards can show both horizontal location and grade.

1. Which of the following statement about laser is wrong?

Group of answer choices

1. A laser is a bright beam of monochromatic light.
2. A single-beam laser projects a narrow “string line,” easilyvisible as a bright dot on a flat surface or target.
3. The single-beam laser can be used to give line.
4. A rotating-beam laser can be used to give line.