Design a single stage BJT amplifier with the followingconstraints:
This involves the following:
-DC and AC analysis and the frequency response of theamplifier.
-Use a 2N2222 transistor
-Power supply (VCC): 6 V
-An input impedance near to 3 kΩ
-Overall midband voltage gain of -30 V/V
-A load resistance of 2 kΩ
-The input signal has an RSignal of 500 Ω
-Choose a good Qpoint and select the coupling and bypasscapacitors to obtain an fL-3dB of 100 Hz.
-The capacitors and resistors should have commercial values
-Part of the design requirement is that the amplifier willexhibit maximum symetrica1 swing in the voltage collector.
The Total Harmonic Distortion of the output voltage should beless than 5% when a sine wave with an amplitude of 5 mV is appliedby the signal.
Determine the analytical fH-3dB of the final design of theamplifier. When the final design is completed, obtain the frequencyresponse of the amplifier to verify the midband voltage gain,fL-3dB and fH-3dB.
